022 99 99 69
TM200CE40R Controller M200 40 IO relay+Ethernet

TM200CE40R Controller M200 40 IO relay+Ethernet

Артикул:

SE0456

Категории:

Детали

Бренд

  • Описание

    Controller, Modicon Easy M200, 40 IO, relay, Ethernet

  • Main
    Range of product Easy Modicon M200
    product or component type Logic Controller
    [Us] rated supply voltage 100...240 V AC
    Discrete I/O number 40
    Discrete input number I2...I5: 4 fast input I0, I1, I6, I7: 4 high speed input I8...I23: 16 regular input
    Discrete output number 16 relay
    Discrete input voltage 24 V
    discrete input voltage type DC
    Discrete input current 7 mA for input
    Discrete input Logic Sink or source (positive/negative) type 1 conforming to IEC 61131-2
    Discrete output voltage 24 V DC 220 V AC
    Discrete output current 2 A
    discrete output type Relay normally open
    Power consumption in VA 59…69 VA at 100...240 V AC (with max I/O)
    Complementary
    Maximum number of I/O expansion module 4 with 128 discrete output(s) for transistor output 4 with 80 discrete output(s) for relay output
    Supply voltage limits 85…264 V
    Network frequency 50/60 Hz
    Inrush current 50 A
    Voltage state 1 guaranteed >= 15 V for input
    Voltage state 0 guaranteed <= 5 V for input
    Input impedance 3.3 kOhm for discrete input
    Response time 5 µs turn-off, I0, I1, I6, I7 terminal(s) for high speed input 5 µs turn-on, I0, I1, I6, I7 terminal(s) for high speed input 100 µs turn-off, I2...I5 terminal(s) for fast input 35 µs turn-on, I2...I5 terminal(s) for fast input 100 µs turn-off, I8...I13 terminal(s) for regular input 35 µs turn-on, I8...I13 terminal(s) for regular input 10 ms turn-off, Q0...Q15 terminal(s) for relay output 10 ms turn-on, Q0...Q15 terminal(s) for relay output 125 µs turn-off, I14...I23 terminal(s) for regular input 55 µs turn-on, I14...I23 terminal(s) for regular input
    Configurable filtering time 0 ms for input 3 ms for input 12 ms for input
    Output voltage limits 30 V DC 250 V AC
    Maximum current per output common 4 A
    Electrical durability 100000 cycles AC-12, 240 V, 480 VA, resistive 100000 cycles DC-12, 24 V, 48 W, resistive
    Switching frequency 0.1 Hz with maximum load
    Mechanical durability 20000000 cycles for relay output
    Minimum load 10 mA at 5 V DC for relay output
    Memory capacity 512 byte internal flash for backup of programs
    Data storage equipment 32 GB micro SD card (optional)
    Battery type BR2032 Li-CFx (Lithium-Carbon Monofluoride), battery life: 5 year(s)
    Backup time 3 years at 25 °C (by interruption of power supply)
    Execution time for 1 KInstruction 0.3 ms for event and periodic task
    Execution time per instruction 0.2 µs Boolean
    Exct time for event task 60 µs response time
    Clock drift <= 90 s/month at 25 °C
    Regulation loop Adjustable PID regulator up to 14 simultaneous loops
    Control signal type Quadrature (x1, x2, x4) at 100 kHz for fast input (HSC mode) Pulse/direction at 100 kHz for fast input (HSC mode) Single phase at 100 kHz for fast input (HSC mode) CW/CCW at 100 kHz for fast input (HSC mode)
    Counting input number 4 fast input (HSC mode) at 100 kHz 32 bits
    Integrated connection type USB port with mini B USB 2.0 connector Non isolated serial link serial 1 with terminal block connector and RS485 interface Non isolated serial link serial 2 with terminal block connector and RS232/RS485 interface Ethernet Modbus TCP/IP Ethernet with RJ45 connector and 1 Ethernet port 10/100BASE-T interface Isolated serial link serial 2 with terminal block connector and RS485 interface
    Transmission rate 1.2...115.2 kbit/s (115.2 kbit/s by default) for bus length of 15 m for RS485 1.2...115.2 kbit/s (115.2 kbit/s by default) for bus length of 3 m for RS232 12 Mbit/s for USB 10/100 Mbit/s for bus length of 100 m for Ethernet Modbus TCP/IP
    Communication port protocol USB port: USB SoMachine-Network Non isolated serial link: Modbus master/slave RTU/ASCII or SoMachine-Network Ethernet Modbus TCP/IP: Modbus TCP/IP client/server
    Local signalling 1 LED (green) for PWR 1 LED (green) for RUN 1 LED (red) for module error (ERR) 1 LED (green) for SD card access (SD) 1 LED (red) for BAT 1 LED (green) for SL1 1 LED per channel (green) for I/O state 2 LEDs (green) for communication (LK/ACT 10/100)
    Electrical connection Mini B USB 2.0 connectorfor a programming terminal RJ45 connectorfor connecting Ethernet network removable screw terminal blockfor inputs removable screw terminal blockfor outputs removable screw terminal block, 4 terminal(s) for connecting the serial link1 removable screw terminal block, 3 terminal(s) for connecting the 100-240 V AC power supply
    Maximum cable distance between devices Unshielded cable: <50 m for input Shielded cable: <10 m for fast input Shielded cable: <10 m for high speed input Unshielded cable: <150 m for output
    Insulation Non-insulated between inputs Between output and internal Logic at 1780 V AC Between output groups at 1780 V AC Between supply and internal Logic at 1780 V AC Between input and internal Logic at 500 V AC Between fast input and internal Logic at 500 V AC Between input groups at 500 V AC
    Sensor power supply 24 V DC at 300 mA supplied by the Controller
    marking CE
    Mounting support Top hat type TH35-15 rail conforming to IEC 60715 Top hat type TH35-7.5 plate or panel with fixing kit conforming to IEC 60715
    Height 90 mm
    Depth 70 mm
    Width 175 mm
    net weight 0.512 kg

Похожие